|
QTI DATA LOGGING SYSTEMS
MidsComm - This system provides a log of the sensor activity. It gives
the user the ability to set up a log which identifies the sensor type, set
priority (color coded), and assign a message to each sensor. When a sensor is
activated, the data assigned to the sensor will appear in the log along with
the Sensor ID Code, date and time activated. This system requires the following
equipment: MCRD/S Base Station Receiver (mounting hardware and software
included). This system is compatible with all Intrusion Detection Systems.
Mapping-Logging System - This system provides the capability to record
and down load GPS coordinates of sensors deployed. After the locations are
recorded on the GPS Locator by ID number, they are down loaded on the computer
and the locations are automatically plotted on a map and recorded in the
MidsComm Log. This system includes a GPS Program Unit and MLS Mapping Logging
Software. An MCRD/S Base Station Receiver must be ordered also to interface
with a computer. Note: When ordering the base station receiver, specify the
frequency range needed. This system is compatible with all Intrusion Detection
Systems.
EC3NS - EMIDS Command Control Communications Network System utilizes a
network of EMIDS sensors which are used to detect activity within a sensor
zone. The sensors are used as trigger events which consist of 2-5 sensors
activated within a specified sequence and gate time. When that occurs, the
preprogrammed Command Module activates a camera (Day & Night Cameras) to
take a digital high resolution picture of the activity. The image is sent by
either 900 MHz radio or Satellite communications to the monitoring site. Relays
can be provided depending on transmission range between the command module and
monitoring site. The monitor includes a mapping system that shows the location
of the sensors and command modules. The monitoring software includes logs of
the sensor alarms and camera event pictures.
|